Full Automatic Servo Motor Injection Molding Machine For Basket / Bucket / Planter

The following should be focused on when using the lubricating oil:

• For the selection of the lube oil and grease,please refer to the recommendation in the above chapter;
Store some lube oil for maintenance need,take care of storage:
a.The oil barrel oil should be properly sealed;Keep away from water;
b.Protect the oil containers from exposure to sundhine;
c.The storage temperature for the oil should not exceed 40

• Proper lubrication will lengthen the service life;on the contrary ,poor lubrication will result in the wear and heat of parts.The clamping unit of the machine employs auto central lubricating device,and the other necessary moving parts have grease nipples for lubrication.

Lubrication oil is an important factor of the machine.No operation without lubricating,otherwise the equipment will be seriously damaged.

• The safety devices include safety door and locking-self mechanism.All safety doors are very important to avoid personal to damage by splashing melted material and prevent person from dangers zone.The locking-self mechanism will stop all damage action at any door opening.

• The safety door limit switch serves to interrupt the mold closing.When the safety door is open,limit switch has been activated to brek the circuit.Its dual circuit control functions of Normally closed and Normail open can stop the motion of the machine.